How to keep tension rods from falling down or slipping on the wall is not a rare question.
There is no doubt that tension rods provide a very nice experience for people who wish to hang their curtains in various places in the house without drilling or using screws.
However, sometimes the tension rods end up falling due to various reasons such as the weight of the curtain and the state of the wall. Trying to get the curtain rod to stay in place can turn out to be such a nasty experience especially when you don’t know how to go about it.
In this article, we shall, therefore, talk about why the tension curtain rods keep falling and how to ensure they stay up.
Reasons why the tension curtain rod keeps falling or slipping
1. The state of the wall
Tension rods can fall if the walls of your shower are dry. Drywall causes the rods to become loose and end up falling due to a lack of strong support.
In order to avoid this issue, ensure the rods have extra support such as by using glue shelf rubber lining on the walls as we have discussed below.
2. The weight of the curtain
The other reason why your tension curtain rods may be falling frequently is that they are made from very weak materials. So they may get overwhelmed by the weight of the shower curtains.
Some curtains like blackout shades, thick drapery like velvet, and interlining are made of very heavy materials. Thus, they require very strong curtain rods to hold them in position.
If your curtain rods are weak, they may not be able to hold the heavy curtains, and so they are likely to fall down very easily.
3. Poorly installed tension rods
Tension curtain rods must be installed at an angle several inches above. This helps to prevent shower curtains from becoming loose easily.
Loose curtains usually put additional weight on the tension curtain rods which contributes to their frequent falling.
How to keep tension rods from falling down or slipping
Use adhesive shower curtain rod holder or rod retainer
Ever heard of a rod retainer?
This is a holder designed specifically to hold curtain rods in place. It has a strong adhesive on one side that secures it to the wall while the top side has a groove where the curtain rod is placed.
A good example is the Adherion rod retainer.
Installation is pretty simple. All you need to do is peel the backside of the retainer and stick it on the wall. No drilling required so it can be used on tiled walls too.
Use non-slip rubber pads or felt pads
Non-slip rubber pads such as X-Protector Grippers will give the tension rods excellent strength by providing a foam around the rod and produce efficient non-slip protection.
Furthermore, the rubber pads are waterproof and thus they will keep the tension rods tight even in the wet bathroom environment.
Glue rubber shelf lining on the wall
The glue rubber shelf lining helps to prevent the tension rods from getting wet from the water in the shower.
Furthermore, the lining provides a firm grip between the tension rod and the wall. This ensures that the rods remain very tight to the extent that they are able to support the shower curtains for a very long time.
In addition, they also help to prevent the tension rod from scratching the wall and make it hard for the rod to suction properly and to stay in place.
Use closet pole holders if the walls are dry
As aforementioned, if the wall is dry, the tension rods may fall. Thus, using closet pole holders can help to strengthen the tension rods and ensure that they don’t fall.
Furthermore, there are heavy-duty shower curtains, which makes it difficult for the tension rods to support them for long. Therefore, the use of closet pole holders provides additional support to the tension rods and ensures that they remain as tight as ever.
See also: Best curved shower curtain rods
To conclude, the issue of your tension curtain rods falling is not strange and should not be of great concern to you. This is because there are various factors that contribute to the same even for those people with curved shower rods.
They include the state of your walls, the weight of your shower curtains, and poorly installed tension rods. In this article, we have talked about various ways on how to keep tension rods from falling down.
Some of these ways include using non-slip rubber pads, using closet pole holders if the wall is dry, and using glue rubber shelf lining on the wall. We hope that the options we have provided here will help you to prevent future problems regarding the proper installation of your tension rods.